Dnake AC-Y4 User Manual Download Page 11

-11-

 

 

 

Safety & Precautions

 

Safety & Precautions 

To

 protect you and others from harm or protect your device from damage, please 

read the following information before using your device. 

Do not install equipment in the following areas: 

•  Do not install equipment in high temperature, humidity, near the magnetic field, such 

as generators, transformers or magnets, etc. 

•  Do not place the equipment near the heating items such as the electric heater or the 

liquid container. 

•  Do not place the device directly in the sun or near the heat source, which may cause 

the body to be discolored or deformed. 

•  Do not install the equipment in an unstable position to avoid the property losses or 

personal injury caused by the falling of device. 

Prevent electric shock, fire and explosion

 

•  Do not use damaged power cord, plug or loose power outlet. 
•  Do not touch the power cord with wet hands or unplug the power source by pulling 

the power supply. 

•  Do not bend or damage the power cord. 
•  Do not touch the equipment with wet hands. 
•  Do not let the power slide, or cause a collision. 
•  Do not use power supply without manufacturer approval. 
•  Do not splash water or other liquids into the equipment. 

Clean surface

 

•  Use a soft cloth dipped in a small amount of water to clean the surface of the 

machine and dry it with a dry cloth. 

Other matters needing attention

 

•  In order to prevent damage to the paint or housing, do not expose the device to 

chemical products, such as thinner, gasoline, alcohol, insect repellant, sunscreen, or 

pesticides, etc. 

•  Do not beat or hit the device with a hard object. 
•  Do not disassemble, refit or modify the device at your own discretion. The arbitrary 

modification is not covered under warranty. When any repair required, please contact the 

customer service center. 

•  When the device emits abnormal sound, smell or smoke, unplug the power 

immediately and contact the customer service center in time. 

Summary of Contents for AC-Y4












Reviews: