Dnake 905D-Y4, User Manual, Page: 6 / 31

3
BASIC OPERATIONS
After the door station is powered on, the LCD display is shown as below:
Call: #
Center: 0000+#
Unlock: #+PSW+#
Cancel: Press*
Admin:
Press * twice to start face recognition.
In a standby mode, inputting "0000"(4 digits) on door station
,
the LCD display
is as shown as below, then press “#” to enter the call state.
Note: During communication, pressing “*” on the door station, the call will be
cut off.
Call: #
Center: 0000+#
Unlock: #+PSW+#
Cancel: Press*
0000
Press * twice to start face recognition.