12
6. EDIT
When you press
[EDIT]
button
，
The LCD displays
‘CTLdata1’
and the EDIT MODE is
activated. In this mode, you can change the parameters of the pads, knobs and
sliders. The EDIT MODE allows you to fully customize and optimize your controller
for the best desired performance.
The different parameters that you can edit are organized under two different pages
on the display and are described below. Depending on which event type you select
on Page 1, you will be given different parameters which you can edit on Page 2.
To select the controller you wish to edit, just move any slider, knob or hit a pad
–
This will prompt the screen to display the properties of that particular controller.
You can select the desired controller with the
[VALUE]
dial. Pressing [ENTER] will
confirm the value.(In edit mode, there is no message can be sent).
