DMX-LED-Dimmer X9HR+
24
Configuration of the dimming curve (Curve definition)
The
DMX-LED-Dimmer X9HR
has a freely programmable dimming curve (look-up
table / curve definition) for each output.
The received DMX-Channel has values from 0 up to 255 (8 bit). The DMX-LED-
Dimmer X9HR output driver provides 65536 steps (16 Bit) which are assigned to the
DMX values.
So, it is possible to effect with small steps little brightness changings in the lower
brightness range. However, in the upper brightness range it’s possible to program
bigger steps.
If no dimming curve is configured (delivery status) the output control is linear.
Set dimming curve via RDM
The RDM parameter CURVE_DEFINITION is used to set the dimming curve /
lookup tables.
For this parameter, the Program RDM Configurator offers the following interface
for editing the dimming curve:
A detailed description of the functions can be found in the RDM Configurator
manual.
