DMX-LED-Dimmer CC4
6
DMX-Addressing
The starting address is adjustable with the switches 1 to up 9.
Switch 1 has the valency 2
0
(=1), switch 2 the valency 2
1
(=2) etc. until switch 9 has
the valency 2
8
(=256). In total the switches showing ON correlate with the starting
address.
The DMX start address can also be set via the RDM parameter
DMX_STARTADDRESS. All switches must be in the OFF position for RDM
operation.
LED-Display
The integrated green LED is a multi function display.
During the normal operation mode the LED lights permanently. In this case the
device is working.
Furthermore, the LED shows the current status. In this case the LED lights up in
short pitches and then are missing for longer time.
The number of the flashing lights is equal to the event number:
Error
Error Description
Description
1
No DMX
No DMX-Signal detected at signal input
2
Addressing-Error
Check if a valid DMX starting address is
adjusted
4
Factory Reset
A Factory-Reset was executed
1
2
4
8
1
6
3
2
6
4
1
2
8
2
5
6
O
F
F
