ArtNet Relais/Analog Interface 4
19
Execute
Update
The
ArtNet Relais/Analog Interface
has an Update-Function which allows to
transfer prospective Firmware-Updates.
Please proceed as follows:
-
Turn off the device
-
Place the MODE-Jumper J2 to J3 as shown
-
Turn on the device
-
The yellow LED lights up
-
Occur a connection between PC and network
-
Start the Update-Software
DMX4ALL LAN-Updater
-
Select the
ArtNet Relais/Analog Interface
from the list
-
Click
Firmware-Update
-
Select the Firmware-Data (.bin) and confirm
-
Wait until the Update has finished
-
Set the MODE-Jumper to the original condition
If during the Update occurs an error you can start the Update again any time.
Alternatively, the Firmware Update can be activated via web browser:
-
Open the Firmware Update
within the web browser
-
Enter the shown code “1379” in the entry field and click
Send
-
Start the
DMX4ALL LAN-Updater
-
Select the
ArtNet Relais/Analog Interface
from the list
-
Click
Firmware-Update
-
Select the Firmware-Data (.bin) and confirm
-
Wait until the Update has finished
-
Click
Back
in the web browser
