7
Using
Using
Using
Using Bluetooth
Bluetooth
Bluetooth
Bluetooth
Your Bluetooth device (iPod/iPad/iPhone or the Smart phone, MP3 player, computer, etc) must
support the A2DP Bluetooth profile to match this tower speaker. For accurate information about
your product, please refer to your Bluetooth device’s manual book for details on the Bluetooth
profiles it supports, and how to set the device’s Bluetooth pairing/Searching/Setup mode.
1.
Press the Power button on the unit or remote control to switch on the speaker, and then press
one the Power button on the speaker or Bluetooth button on the remote control to select the
Bluetooth mode, the blue indicator of the Bluetooth mode will flash, which indicates
Bluetooth source mode is effective.
2.
Press and hold the Play/Pause on remote control 3-5 second , will listen the “DU’’ sound
signal and blue light will flash quickly , it meaning the unit going to pairing mode.
3.
Activate the Bluetooth on player device and search BTi60 and select.( ‘0000’ Password , if
request)
4.
The ‘DU’ sound will pop up and blue light will stop flashing , it meaning pairing complete
and connect.
5.
Now you can play music from your iPod/iPhone or mobile phone through the Bluetooth
tower speaker. Adjust the volume by adjusting the control on the tower speaker or the
Bluetooth device.
6.
The previously paired device (make sure the Bluetooth is switched on) will auto connect to
the tower speaker once the speaker is powered on.
7.
If the pairing is unsuccessfully and connecting , please repeating the above steps.Note: When
it is not being used for a long period of time, please turn off the speaker.
AUX
AUX
AUX
AUX IN
IN
IN
IN
You can enjoy the music from the tower speaker when the AUX in jack is connected to the
external audio device or iPod, iPad Mini or iPhone 5th. Plug one side of the AUX in cable to the
Audio Output jacks of your auxiliary sound source (iPod/iPhone/iPad, TV, VCR, DVD Player,
MP3 player, Cassette Deck, Mini Disc Player, etc,), plug the other side of the AUX in socket on
the back panel of the tower speaker, refer to the connection options as below image, the auxiliary
function is ready now for using.
Press the STANDBY button on the remote control to power on the unit when the connecting
process as above is finished.
Press the AUX button on the remote or press the power button on the unit to select AUX function,
the Green Aux LED lights up. The sound from the auxiliary source will be heard through the
speakers of this system.
Switch on your audio device, play your audio device as usual.
Press the /-, BASS+/- or the TREBLE-/+ on the tower speaker to adjust the sound
effect level.
Please remove the AUX in cable if it is not going to be used for a long time and switch off the
tower speaker.
