21
Alpha Series A3.9i
Product code: 101810
Standing Installation
By the standing installation, the device is installed on top of a rigging bar.
To install the LED screen to a standing rigging bar, follow the steps below:
Remove the rigging eye(s) from the top of a rigging bar, as shown in Fig. 26.
Fig. 26
Put the LED screen on top of the rigging bar, so that the fast-lock openings (11) on the bottom of the
LED screen fit in the fast-locks of the rigging bar, as shown in Fig. 27 and 28.
101820
101821
Fig. 27
Fig. 28
Turn lever (A) of the left locking mechanism (06) counterclockwise.
Push the spring-loaded fast-lock (B) of the left locking mechanism (06) on the rigging bar upwards
and turn it by 90°, as shown in Fig. 29 and 30.
Fig. 29
Fig. 30
