Alert Operation
Steady Tone
A trouble condition on the system. A zone
number may be displayed. Pressing any key
silences the steady alert tone.
1 One-Second Beep
Indicates the successful completion of a function.
4 Short Beeps
When an incorrect key or function is entered.
1 Short Beep
Each time a key is pressed.
Panic Key Operation
Your keypad may be programmed to send a Panic, Emergency, or Fire
report to your monitoring station. If this option is programmed for your
keypad, icons appear below the top row Select keys. Press and hold the
two Select keys adjacent to the desired icon for 2 seconds and a beep
from the keypad is heard. The report is sent to your monitoring station.
Top Row Select Keys
Police
Emergency
Fire
The Icons
AC Power
On Steady - AC power is good.
Pulsing - AC power is off.
Battery
On Steady - Battery power is good.
Pulsing - Battery power is low.
Armed Status
Open Lock - The system is completely disarmed.
Closed Lock
- Some or all areas are armed. See System
Displays A, H, P or S.
Closed Lock/Instant
- Some or all areas armed Instant.
See Arming the System.
Door Chime
Door or window perimeter zone(s) are selected for monitor.
See Door Chime.
Thumbs Up
All burglary protection zones are normal and system is
ready to arm.
Thumbs Down
System is not ready to arm due to a burglary zone in a
faulted state such as an open door. See Zone Status.
Telephone handset
Pulsing - A system message being sent to your monitoring
station failed to transmit over the telephone line.
Burglar
A burglary alarm has occurred. The zone number is shown
in the 3-character display.
Flame
A fre alarm has occurred. The zone number is shown in
the 3-character display.
System Test
System Test is used to test the battery, alarm bell or siren, and
monitoring station communi cation. Press and hold the TEST (
) key
for two seconds. The System Test function begins automatically as
soon as you select it.
Test in Progress (tSt)
The system is currently being tested by an installation or
service technician. The bell sounds for two seconds and
then the communication test begins.
Transmit Good (tgd)
The communication portion of the system test was
successful.
Transmit failed (tfL)
The communication portion of the system test failed to
communicate to the Central Station.
System Displays (3-Character)
Armed (A)
The system is armed ALL or AWAY.
Alarm not Sent (Abt)
The alarm signal was aborted and not sent to the central
station because a user code was entered to disarm the
system or CANCEL was selected.
Alarm Cancelled (ALC)
An alarm signal just sent to the central station was
cancelled because a user code was entered after the
alarm was sent or CANCEL was selected.
home (h)
The system is armed HOME.
Perimeter (P)
The system is armed Perimeter. (PERIM)
Sleep (S)
The system is armed SLEEP.
System Busy (bSy)
The system is performing other functions at this time.
Wireless Jammed Alarm (rfA)/Trouble (rfJ)
Your system may be programmed for wireless interference
detection and, if displayed, your wireless receiver has
detected an interfering signal.
Wireless Trouble (rft)
Your wireless receiver is unplugged or not operating
properly.
Protecting life and property since 1968
Alarms in Progress
Customer Service
Billings and Administration
(204) 949-1415 or 1-866-949-1415
(204) 975-0698 or 1-866-975-0698
(204) 975-0689 or 1-866-975-0689
www.protelecalarms.com
Key Contact Numbers
R G
U
L A
B
R
•
Y
•
E
M
R
I
E
F
D
IC
C
E
E
C
N
I
T
V
R
R
A
E
L
S
S
G
T
N
A
I
T
R
IO
O
N
T
I
N
MO
P
RO
TELEC ALARMS
P
RO
TELEC ALARMS
P
RO
TELEC ALARMS
P
RO
TELEC ALARMS
