DMP Electronics EBOX-336 Series, User Manual

Page: 25 / 49

EBOX-336x Series User Manual
DMP Electronics Inc. 25
Additional information
Disable TRIM function:
TRIM function sets enable as default in Windows 7 and WES7 OS. EBOX-336x Series does not support storages
with TRIM function (SSD/ Disk on Module). User has to disable TRIM function manually by following steps:
1. Open command prompt as Administrator.
2. Execute fsutil behavior query disabledeletenotify to check TRIM status.
Results explained below:
DisableDelecteNotify = 1 (Windows TRIM commands are disabled)
DisableDelecteNotify = 0 (Windows TRIM commands are enabled)
3. To disable the TRIM function by executing fsutil behavior set disabledeletenotify 1
Execute fsutil behavior query disabledeletenotify again and make sure the TRIM Commands are
disabled. ie: DisableDelecteNotify = 1.