DMP Electronics EBOX-335xDX3 Series, User Manual

Page: 2 / 40

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 2
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may contain in this document, and makes no commitment to update or to keep
current information contain in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in
any form or by any means without the prior written permission of the DMP Electronics Inc.

Copyright 2019 DMP Electronics Inc.
Trademarks Acknowledgment
is the registered trademarks of DMP Electronics Inc.
Other brand names, product names or trade names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith are served for
identification purpose only.
Safety Information
WARNING

Do not expose EBOX to rain or moisture, in order to prevent shock and fire hazard.

Never install EBOX in wet locations.

Do not open cabinet to avoid electrical shock. Refer to the nearest dealer for qualified personnel servicing.

Never touch un-insulated terminals or wire unless power adaptor and display monitor are disconnected.

Locate EBOX as close as possible to the socket outline for easy access and to avoid force caused by
entangling of your arms with surrounding cables from the EBOX.

When using EBOX, avoid using or installing the modem to the serial port during a storm or a lightning.

Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.

USB connectors are supplied with Limited Power Sources.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS (ENCASING)
OF THIS PRODUCT. PLEASE CONTACT YOUR NEAREST DEALER FOR
SERVICING FROM QUALIFIED TECHNICIAN.