7800INT Series International Installation and Programming Guide | Digital Monitoring Products, Inc.
31
Update the Keypad
Use the
Restart Keypad
screen to initiate a firmware
update, add a dealer logo, or add dealer contact
information from a microSD card. This process takes
approximately 5 minutes to complete.
Update Firmware Using Restart
1.
Navigate to DMP.com/Dealer_Direct and
select
Software Downloads
from the
navigation menu.
2. Select a
Software Update
.
3. Select
Download
and enter
Your Name
,
Your Company
, and
information.
4. After the .zip download is complete, unzip the files and save them all to the root
directory of a FAT32 format microSD card.
5. Insert the microSD card into the microSD card slot on the right side of the keypad.
Refer to Figure 11.
6. Press
Options
in the carousel menu and press the
Installer Options
or wrench icon.
7. Enter
3577
(INST) and
CMD
for XR Series International panels or
357
and
CMD
for
XT30INT Series panels.
8. Select
KPD OPT
.
9. Press
CMD
until
Restart Keypad
displays (After the
Select Language
screen). See
10. Press
Restart
. Do not remove the microSD card or disrupt power.
11. The update is complete when the keypad returns to the home screen. Remove the
microSD card.
Figure 15: Restart Keypad
