Digital Monitoring Products, Inc. | 714N-POE Installation and Programming Guide
3
INSTALL THE 714N-POE MODULE
The module comes in a high-impact plastic housing that you can mount directly to a wall, backboard,
or other flat surface.
For easy installation, the back and ends of the housing have wire entrances. The back also contains
multiple mounting holes that allow you to mount the module on a single-gang switch box.
1. Remove the circuit board from the plastic housing by loosening the clips on one side and gently
lifting it out of the housing base.
2. Use the included screws in the desired mounting hole locations to attach the remote module to
the surface. See the shaded mounting hole locations in Figure 2.
3. Reinstall the circuit board in the housing base.
MOUNT THE DEVICE
Mounting Hole
Figure 2: Mounting Hole Locations