DMP Electronics 570 Easy Entry Installation Manual Download Page 4

LT

-0411 (10/05) ©  2005 Digital Monitoring P

roducts Inc.

Operating the Key Ring Transmitter

The Model 575 Key Ring Transmitter provides three buttons for operation.  The small LED on the transmitter lights 

any time a button is pressed.

Transmitter Button

Operation

Top

Alarm On/Off/Perimeter

Middle

Garage Door OPEN/CLOSE

Bottom

PANIC or Optional Accessories

Top Button

Arming and Disarming the System

Pressing the 575 Key Ring Transmitter top button sends the 4-digit user code to the panel.  This code arms or disarms 

all panel areas.  The Armed Status LED lights indicating an armed status.  Pressing the top button again disarms the 

system.
Pressing the top button for more than three seconds arms the perimeter protection only.  Pressing the top button 

again disarms the system.  

Middle Button

Garage Door

The timed output can be used to trigger additional accessories such as driveway, porch, or Malibu lighting.  Pressing 

the key ring transmitter middle button activates the garage door.

Bottom Button

The key ring transmitter bottom button may be set up to send either a panic signal or turn optional accessories on or 

off. 

Panic Button

Pressing the bottom button for more than three seconds sends the Panic signal.  This is equivalent to pressing the 

Badge Panic keys on a keypad.

Optional Accessories

Pressing the bottom button on the transmitter causes the optional accessories to turn on or off.

Central Station Reporting

When the key ring transmitter bottom button is programmed as a Panic Button, pressing the button for three or 

more seconds sends the panic signal to the central station.  The panic displays at the central station receiver as 

Zone 19 Address 8.  

Specifications

Remote Transmitter

Range 

150 Feet

Battery 

Type 23A 12 VDC Mini 

     

(replace yearly)

Frequency 

303 MHz

Temperature Range  32°F to 120°F
Dimensions 

2.25" H x 1.5" W x 0.5" D

Receiver

Current Draw

    Power 

12 VDC from panel

    Standby 

20mA

Frequency 

303 MHz

Temperature Range  -5°F to 160°F
Dimensions 

3" H x 3.5" W x 1.125" D

Garage Door/Optional Accessory

Relay Contacts 

2 Amps

800-641-4282

www.dmp.com

Made in the USA

INTRUSION • FIRE • ACCESS • NETWORKS

2500 North Partnership Boulevard

Springfield, Missouri 65803-8877

Summary of Contents for 570 Easy Entry

Page 1: ...ress 1 when programming Garage Door All garage door openers have a wall mounted push button switch that activates the door through a 2 wire connection These two wires connect the push button switch to the garage door motor The 2 Amp relay output provided from the receiver is turned on or off using the middle button on the 575 Key Ring Transmitter Connect the Red White N O and White common wires of...

Page 2: ...anel terminal 7 See Figure 3 The Armed Status LED operates as shown LED System Status Slow Blinking Exit Delay On Armed Off Disarmed Fast Blinking Alarm Optional Accessory Relay When the panic button operation is not enabled see Operating the Key Ring Transmitter a relay is provided for optional accessories control such as Malibu lighting sprinklers or X 10 automation The output provided from the ...

Page 3: ...e to turn the programming LED on steady While the LED is on press the key ring transmitter top button three times The LED turns off indicating the transmitter has been learned Up to seven transmitters can be learned The eighth transmitter learned overwrites the first transmitter learned To delete a transmitter from the receiver all transmitters will be deleted Press and hold the receiver programmi...

Page 4: ...m Button The key ring transmitter bottom button may be set up to send either a panic signal or turn optional accessories on or off Panic Button Pressing the bottom button for more than three seconds sends the Panic signal This is equivalent to pressing the Badge Panic keys on a keypad Optional Accessories Pressing the bottom button on the transmitter causes the optional accessories to turn on or o...

Reviews: