Designed, engineered, and
manufactured in Springfield, MO
using U.S. and global components.
LT-2243 1.01 20XXX
1100T WIRELESS
TRANSLATOR
Specifications
Operating Voltage
XX VDC, XX mA
Standby Battery
Voltage
3.7 VDC
Capacity
800 mAh
Type
Lithium Polymer, rechargeable
Standby
24 hours
Frequency Range
905-924 MHz
Dimensions
5.50” W x 3.75” H x 1.00” D
13.97cm W x 9.53 cm H x 2.54 cm D
Ordering Information
1100T
Wireless Translator
Patents
U.S Patent No. 7,239,236
Accessories
1100RBAT800/8
Replacement rechargable battery
(8 pack)
505-12
12 VDC Power Supply
372-500-W
Plug-In DC Power Supply
Compatibility
All DMP XT Series panels and XR Series panels with version
203 or higher
All 1100 Series Wireless Receivers with version ????? or higher
Interlogix 319.5 MHz
Honeywell 5800 345 MHz
2GIG Series 345 MHz
DSC 433 MHz
Certifications
?????????????????????????
I N T R U S I O N • F I R E • A C C E S S • N E T W O R K S
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
800.641.4282 | DMP.com
© 2020
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
this device must accept any interference received, including interference that may cause undesired operation.
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.874 in.) from all persons. It must not be located or
operated in conjunction with any other antenna or transmitter.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note:
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA INFORMATION
This device complies with Industry Canada Licence-exempt RSS standards. Operation is subject to the following two conditions:
1.
This device may not cause interference, and
2.
this device must accept any interference, including interference that may cause undesired operation of the device.
This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health Canada Safety Code 6. The system
must be installed at a minimum separation distance from the antenna to a general bystander of 7.87 inches (20 cm) to maintain compliance with the General
Population limits.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
1.
l’appareil ne doit pas produire de brouillage, et
2.
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme aux limites établies par le Code de sécurité 6 de
Santé Canada. Le système doit être installé à une distance minimale de 7.87 pouces (20 cm) séparant l’antenne d’une personne présente en conformité avec les
limites permises d’exposition du grand public.
