DMI Sports
For Customer Service Call 1.800.399.4402
STEP 3.
IF NOT PRE-ASSEMBLED
(Fig. 3.1)
attach the metal ring
(P7)
to the end (hole) of each
safety catch
(P8)
. Make sure the
safety catch works properly by pulling
the metal ring.
Attach Plastic Corners
using an
(H9)
screw, attach the
(P22)
plastic corners to the
pre-assembled end
and side aprons.
Prince Match FSA - Code: PT400 - Assembly Instructions
(H1)
(H6)
(P2)
(P1)
(H4)
FIG. 2.1
FIG. 2.3
FIG. 2.2
FIG. 3.1
STEP 1.
Separate all parts according to the assembly steps.
(P9)
(P3)
(P6)
(P3)
(H3)
(H5) (P4)
(H2)
IMPORTANT!
Press (Wheel Assembly)
into carriage as indicated in
FIG. 2.2
and bolt to carriage
frame with lock nut (H6).
(P8)
(P7)
Note:
FIG 3.1
comes fully assembled
to
(P15)
.
STEP 2
.
(Fig. 2.1)
Locate two
(P3)
carriage pieces (Tabel Frame) and attach
(P2)
into the base holes
provided using assembly hardware parts
(H6)
and
(H10)
. Attach two
(P1)
wheels to
(P2)
wheel bracket using
(H1)
and
(H4)
. (If too tight, the wheels will not spin) Repeat this step for
the remaining wheels. There will be four double wheels when Step 2. is complete. Washer (H11)
can be found with Plastic Corners (P22) within seperate bag in packaging.
(P19)
(P15)
(P22)
(H9)
-5-
(P23)
(H10)
DO NOT OVER TIGHTEN BOLTS
AT PIVOT POINT (H6).
