DMI Sports
For Customer Service Call 1.800.399.4402
-7-
DMI Sports
For Customer Service Call 1.800.399.4402
DMI Sports
For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP 5.
With at least two adults, carefully turn the
table over onto the leg levelers.
Each End Ramp (P6-P8) has an adhesive side,
on which you will apply to the edges of the
Playing Field (P3). Simply peel and remove
the protective layer from the underside of
each End Ramp and place them in
the designated location as illustrated in
Figure 5.1.
STEP 6.
Now you can assemble the Player Rods (P14-P20). First slide the end of the player rod without the hole
on the end, through one side of the Side Panel (P2) hole. Add a Plastic Washer (P13), Bumper (P11), Steel
Washer (P12), Home or Away Men (P20) or (P19),
(depending on which rod you are assembling)
another
steel washer,
washer
washer bumper and plastic washer before continuing the rod through the opposite side of the side
panel. Secure the men in place with Bolt (H9) and Nut (H7) as shown in Figure 6.2. Apply the Handle (P14)
to the end of the player rod with the hole through it using Screw (H8). If done correctly, while standing in
playing position, your men should be facing your right.
Continue this step for all of the Player rods in the following order:
is step f
is step f
Off ensive 3 player rod, Off ensive 2 player rod, Defensive 3 player rod, Off ensive 5 player rod, Defensive 5
player rod, Off ensive 3 player rod, Defensive 2 player rod, Defensive 3 player rod
Once the rods are assembled correctly, add the Cup holders (P22).
Notice the face on the “front”
of the men. This side should face
the opposing goal.
P14
P13
FIG. 6.1
FIG. 6.
P11
P12
H9
H7