©COPYRIGHT 2018 DANIELS MANUFACTURING CORPORATION
WWW.DMCTOOLS.COM
(407) 855-6161
PATENT #7,243,429
14
TSK8000 MANUAL
TSK8000-M
REV E
Stripping the Cable
Important Note:
Verify that correct die set is installed for the type of cable being stripped.
1. When the dies are correctly closed around the cable, pull the cable in a smooth and
in-line motion away from the tool and the blades in the die set will precisely slit the outer
jacket (A). The user may find that scoring instead of cutting completely through the jacket
produces the best results. This is acceptable.
2. Some set-up and adjustment will be required to adapt the tool/dies to the exact cable ap-
plication being prepared for termination.
Important Note:
DO NOT pull the cable at an angle, suddenly, or with a jerking motion.
5.6
A
