GAGING INSTRUCTIONS
"GO" GAGING
,,,.
�DANIELS
�.,.-
MANUFACTURING
,...., CORPORA T/ON
DATASHEET
"NO-GO" GAGING
Operate the tool to the fully closed position. Maintain firm hand
pressure on the tool handles. Insert the "GO" gage end as
shown. The gage must pass freely between the indenter tips.
Operate the tool to the fully closed position. Maintain firm hand
pressure on the tool handles. Try to insert the "NO-GO" gage
end as shown. The "NO-GO" gage may partially enter the
indenter opening, but must not pass completely through.
GAGING LIMITS
INSPECTION GAGE
GREEN
SEL
0GO
0 NO-GO
NO
±.0001
±.0001
RED
1
.0160
.0210
2
.0190
.0240
3
.0220
.0270
4
.0250
.0300
INDENTER
5
.0290
.0340
6
.0330
.0380
7
.0370
.0420
8
.0410
.0460
GREEN "GO"
CAUTION!
DO NOT CRIMP GAGE !!
GAGE: USE G145 (M22520/3-3) ON SEL #8
CARE OF TOOL
There is virtually no maintenance required. However, it's good practice to keep indenter tips
free of residual deposits and other debris. A small wire brush may be used for this purpose.
We strongly recommend that you:
1. DO NOT immerse tools in cleaning solution.
2. DO NOT spray oil into tool to lubricate.
3. DO NOT attempt to disassemble tool or make repairs.
This is a precision hand crimp tool and should handled as such.
DMC offers complete refurbishing and recalibrating services.
DMC specially engineers and manufactures complete tool kits to satisfy individual
customer requirements, such as total aircraft support, general shop maintenance or
production, on board ship and vehicle service, etc.
LIMITATION OF LIABILITY
DANIELS MANUFACTURING CORPORATION IS NOT LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY NATURE OR KIND
RES UL TING FROM THE USE, MISUSE, OF ANY OF ITS PRODUCTS. OWNERS AND USERS OF DMC PRODUCTS ASSUME FULL
RESPONSIBILITY FOR INSTRUCTING THEIR EMPLOYEES IN THE PROPER AND SAFE USE OF SUCH PRODUCTS.
LIMITED WARRANTY
DMC (Daniels Manufacturing Corporation) warrants each new product sold by it to be free from defects in material and workmanship
under normal use and service. DMC's obligation under this warranty is limited to the free correction or, at DMC's option, the refund of
the purchase price of any such product which proves defective in normal service within ninety (90) days after delivery to the first user,
provided that the product is returned to DMC with all transportation charges prepaid and which shall appear to DMC's satisfaction, after
DMC's inspection, to have been defective in material or workmanship, it being understood that DMC products are not consumer
products. This warranty shall not cover any damage to any products which, in the opinion of DMC, was caused by normal wear,
misuse, improper operation, tampering, neglect or accident. This warranty is in lieu of all other warranties express or implied. No
warranty, express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing
Corporation other than those herein set forth.
