HPU13M Battery-powered Pump
HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP.
ALL RIGHTS RESERVED
526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161
www.dmctools.com
10
Maintenance
Wear eye protection when operating or
servicing this tool.
Failure to wear eye protection could
result in serious eye injury from flying
debris or hydraulic oil.
Skin injection hazard:
Do not use hands to check for oil leaks.
Oil under pressure easily punctures skin.
If injured, seek medical attention imme-
diately to remove oil.
Failure to observe this warning could
result in serious injury, gangrene, or
death.
Do not use solvents or flammable liquids
to clean the tool body. Solvents or flam
-
mable liquids could ignite and cause
serious injury or property damage.
Cutting hazard:
• Remove battery before changing dies,
adapters, or jaws.
• Keep hands away from the head when
in operation.
Failure to observe these warnings could
result in severe injury or death.
Relief valve adjustments must be done by an
authorized service center.
Daily
Before use:
1. Inspect the tool for wear or damage, such as cracks,
gouges, or chips.
2. Inspect the tool for damage or leaks.
After use:
1. Use a damp cloth and mild detergent to clean the housing.
Allow the housing to dry.
2. Store the tool in a cool, dry place.
3. If necessary, recharge the batteries. Refer to the instruc-
tions supplied with the battery charger.
Monthly
1. Thoroughly clean all surfaces.
2. Check the oil level.
Annually or After 10,000 Cycles
1. Replace the hydraulic oil.
2. Send the tool to DMC for inspection.
Checking the Hydraulic Fluid Level
The pump has an oil plug with inspection glass, which can be
used to determine the proper oil level. If the oil level is too
low, the reservoir must be filled.
The following hydraulic oils are suitable for a temperature
range of 10 °F to 104 °F (-12°C to 40 °C):
• Hydraulic oils based on Ester: Rivolta S.B.H. 11, Shell
Naturell HF-E 15.
• Mineral oils: Shell Tellus T 15, AVIA HVI 15, Mobil DTE
11, NUTO H 15, Rando HD-Z15, Agip OSO 15, BP Energol
HLP 15.
• Other equivalent oils.