HDE51C
BATTERY POWERED CRIMP TOOL
DATASHEET
HDE51C-DS
©2022 DANIELS MANUFACTURING CORP., ALL RIGHTS RESERVED
Page 1 of 8
REV. A
7/26/2022
Daniels Manufacturing Corporation
526 Thorpe Road, Orlando, FL 32824 USA
Phone: 407-855-6161 Fax: 407-855-6884 Email: [email protected]
Description
The HDE51C Battery Powered Crimp Tool is a hand held,
self contained crimp tool intended to crimp copper and
aluminum cable with DMC HD51 dies.
Safety
Safety is essential in the use and maintenance of DMC
tools and equipment. This manual and any markings on
the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe all
of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with the
safe operation and maintenance procedures for the
following DMC tool:
HDE51C Battery Powered Crimp Tool
Keep this manual available to all personnel. Replacement
manuals are available upon request at no charge.
All specifications are nominal and may change as
design improvements occur. DMC shall not be liable
for damages resulting from misapplication or misuse
of its products.
KEEP THIS MANUAL
Important Safety Information