●
Normal and low battery — LED flashes blue three times, then green.
●
Charging — LED flashes red and purple three times.
To switch your PACKTALK SKI off:
●
Press both
and
.
The LED flashes red three times, confirming that your unit is switching off. The speaker plays a descending
tone and a voice message, "Goodbye".
2.4 USING YOUR PACKTALK SKI
You can operate the various features of your PACKTALK SKI in the following ways:
●
Press a button or combination of buttons on the unit.
●
Use the Cardo Mobile App on your mobile device (once it is paired with the unit).
2.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES
To connect your unit to a Bluetooth device, you must first pair them. Once paired, they automatically recognize
each other whenever they are within range.
To pair your Bluetooth channel to a mobile phone:
1.
Enable Bluetooth on the mobile phone.
2.
On the unit in standby mode, press
for 5 seconds.
The LED flashes red and blue.
3.
On your mobile phone, search for Bluetooth devices.
4.
When your PACKTALK SKI appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros).
The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
●
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP) even if the phone has an MP3
player function. Consult your mobile phone’s user manual for more information.
To cancel the pairing process:
●
Press
for 2 seconds.
The LED stops flashing red and blue/green.
6
Summary of Contents for cardo PACKTALK SKI
Page 1: ......