trapeze table assembly instructions
1. Lie base on side and slide poles through each corner.
2. Slide uprights onto poles with single loop at top.
3. Position top frame onto posts and tighten bolts lightly.
4. Stand table upright and slide main board into position
on base.
5. Ensure all loops are straight by twisting posts and /
or uprights.
6. Fit upper and lower swing bars with pivot bolts and
spacers as per diagram
(A)
. Swing bars can be mounted
with both on one end if desired, Extra swing bars can
be ordered and fitted directly to frame.
NOTE : the same assembly procedures
apply for the compact trapeze.
mounting points
for extra swing bar
diagram A: Some adjustment of rod ends may be required
Note: Ensure that tapered end of spacer bush fits
to the ring on the frame or damage can occur.
for correct swing bar alignment.
washer
