Model
Woofer
Mid
Tweeter
Nom.
Max
Sensi-
Magnet
Inst.
Mounting
Crossover
power
power
tivity
size
depth
hole bass driver
UP5i
13 cm /5,25”
28 mm / 1,1”
120 W
180 W
89 dB
62 mm / 2,44”
58 mm / 2,28”
120 mm / 4,72”
Separate box
UP6i
16,5 cm / 6,5”
28 mm /1,1”
150 W
180 W
88 dB
62 mm / 2,44”
63 mm / 2,6”
140 mm / 5,51”
Separate box
UP8i
20 cm / 8”
28 mm / 1,1”
150W
200W
89 dB
62 mm / 2,44”
68 mm / 2,7”
182 mm / 7,16”
Separate box
SPEAKER FACTS FOR DLS ULTIMATE UP-SERIES
Filter installation and connection.
TWEETER LEVEL JUMPER
Select between four different tweeter levels by moving the small
jumper inside the filter box.
-4 dB, -2 dB, 0, +2 dB
Installation of tweeter:
SURFACE MOUNTING:
For angled surface mount together with the angled cup:
The tweeter element is attached to the cup by fitting the three wings on
the angled cup into the tracks of the element and then turn it clockwise.
When removing the element from the cup, turn it ccw and lift it up.
RECESSED MOUNTING:
You need a hole with a diameter of 48
mm / 1,89" in the door side. Put the two
metal wings through the two tracks in the
center of the cup, just as the picture
shows, and attach them with the M4
screw and nut through the center hole.
The cup is attached to the door side
when the metal wings is pressed to the
back side of the door.
Put the tweeter element into the cup with
the cable going out through the bottom
hole. Then attach the element into the
cup and turn it clockwise to attach to the
cup. When removing the element from
the cup, turn it ccw and lift it out
INPUT WOOFER TWEETER
+ - + - + -
+
-
Mid
T
weeter
+
-
+
-
Head unit / amp.
+2
0
-2
-4
It is very important that the baffle is stable, but it is just as important
that it is shaped in a way that allows the driver to ”breath”
backwards, otherwise there will be a lack in the drivers bass
reproduction.
Size
28 mm / 1,1"
Nom. power (RMS)
50 Watts (80 Watts max)
Freq. range
1,5 kHz-20 kHz
Sensitivity
93 dB
Magnet diameter
28 mm / 1,1"
Mounting depth
18 mm / 0,71"
Mounting hole
48 mm / 1,89"
Cone material
Hand treated fabric
FACTS ABOUT THE UP1i TWEETER
Installation in baffles:
Wrong way
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
Bad air flow
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
Correct way
with chamfer-
ed edges
Max 5 mm
Free air flow
Correct way
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
