Owners guide for DLS TSub 8 subwoofer
Introduction
Please read this manual fully before unpacking and
installing the product. It will help you to optimise
the performance of your subwoofer.
Unpacking and maintenance
Your speaker should be treated with the same care
you would treat a piece of furniture. Use only a
piece of soft cloth and a small quantity of warm
soapy water to clean the loudspeakers. Avoid
touching the cone of the bass unit. After unpacking,
we suggest you retain all packing material for
future transports.
System
DLS TSub 8 is an efficient, active subwoofer with a
built-in 300 W power amplifier. The loudspeaker
unit is a specially developed 8” long-stroke woofer
with a powerful magnetic system.
DLS TSub 8 is designed to interact with Hi-Fi
equipment, surround installations and multi-media
systems. The subwoofer allows great freedom in
placement. With the control you can adjust cross-
over frequency and level, which makes it easy to
adjust for the acoustics in your listening room.
IMPORTANT!
Before connecting electricity to the power supply ,
it is important that the POWER switch is OFF and
check so the AC switch 115V-230V is set at correct
voltage for your country. Connect the subwoofers
input signals befor you switch the POWER switch
to ON.
Connection alternatives:
Surround system connections
Surround amplifier provide a separate subwoofer
line output, use a "Line Cable" from this output to
LINE IN right (R), fig 3. You can also use a "Split
Cable" to connect the subwoofer line output to both
LINE IN, left (L) and right (R), fig 4. The sensitivity
then increases with 6 dB.
2-chanel stereo connections
-
Line level input
Should your amplifier have separate pre-amplifier
outputs, you should connect those to LINE IN, left
(L) and right (R). Use a "Stereo Line Cable". Your
front speakers remain connected to the
loudspeaker outputs of the stereo amplifier.
-High level input
Connect the speaker outputs of the stereo power
amplifier to ”left HI LEVEL IN” and ”right HI LEVEL
IN” respectively, fig 2.
Description of subwoofer amplifer,
fig 1.
LINE IN
Connectors for line level RCA input
PHASE
Switch for phase shifting the subwoofer sound
INTERNAL X-OVER/DIRECT
Switch for by-pass (DIRECT) internal crossover
LOW-PASS CROSSOVER
Control for adjusting crossover point to system
VOLUME
Control for adjusting subwoofer level to system
POWER LED
Red for standby and green for subwoofer active
HIGH LEVEL INPUT
For connection from amplifiers speaker output
POWER
Main power switch and power input socket with
fuse holder
MAIN SWITCH (red)
To adjust amplifier for 115 or 230V connections
fig 1
100Hz
30Hz
DIRECT
0°
180°
X-OVER
INTERNAL
PHASE
CROSSOVER
60Hz
LOW-PASS
SUBWOOFER
MIN.
MAX.
VOLUME
POWER
ON
OFF
T2.15AL 250V FOR 230V INPUT
T4.5AL 250V FOR 115V INPUT
115/230V ~ 50/60Hz 500W
DO NOT OPEN
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
AVIS:
C
US
D
2001228
S
I
L
TE
R
THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING: TO REDUCE THE RISK OF FIRE
RISK OF ELECTRIC SHOCK
OR ELECTRIC SHOCK.DO NOT EXPOSE
CAUTION
FIRE, REPLACE ONLY WITH SAME TYPE 250V FUSE.
CAUTION: FOR CONTINUED PROTECTION AGAINST
Subwoofer Amplifier
MODEL:DS3004BP
WARNING:
TO AVOID AMPLIFIER DAMAGE, OBSERVE PROPER
POLARITY IN ALL SPEAKER LEVEL CONNECTIONS.
+
R CH
_
HIGH LEVEL INPUTS
+
L CH
_
R
L
230V
115V
POWER
LINE IN
SERIAL #
Class 2 Wiring
DOUBLE INSULATION - When servicing
use only identical replacement parts.
230V