DLS AMPD1000E Owner'S Manual Download Page 2

- 1 -

Congratulations, you have just purchased the finest Car Audio amplifier that today´s technology can offer.
DLS offers a series of high quality car audio products for real music lovers, and we are sure that you will
enjoy a high class car sound for many years.

Read the owners manual first!

To maximize the performance of your system, we recommend that you thoroghly acquaint yourself with it´s
capabilities and features. Please take your time to study this manual before starting the installation. Then
you hopefully know how to do a correct installation avoiding connecting errors that can cause damage to
this fine product. Retain this manual for future reference.

TABLE OF CONTENTS:

Page 2

1. GENERAL PRODUCT INFORMATION

Page 2

2. INSTALLATION PREPARATION

Page 2

2.1 Location

Page 2

2.2 Power cables

Page 3

2.3 Signal cables

Page 3-4

2.4 Speaker connection, speaker loads, speaker polarity check

Page 4

2.5 Level setting

Page 4

2.6 Final system setup

Page 4

2.7 Protection circuits

Page 4

3. INTERNAL FILTERS

Page 4

3.1 Lowpass / Highpass

Page 4

3.2 Bass boost

Page 5

4. FAULT FINDING GUIDE

Page 5

4.1 Noise problems

Page 5

5. REMOTE SUB LEVEL CONTROL

Page 5

6. SPECIFICATIONS

Page 6

7. CONNECTION DIAGRAM

Page 7

For your own notes

TABLE OF CONTENTS

                CAUTION!

Some of our amplifiers are capable of producing a sound pressure level that can cause permanent
damage to your hearing system. High sound pressure levels combined with long time listening can give
permanent damage to your hearing system. Choose a listening level  that is comfortable for your ear.
To establish a safe level:
Start your volume control at a low setting. Slowly increase the volume until you can hear the music
comfortly and clearly, without any distortion. Sudden sound shocks are dangerous.

The following noises can be dangerous with constant exposure:
90 dB

Subway, motorcycle, lawn mover

4 hours max

100 dB

Chain saw

2 hours max

120 dB

Rock band live concert

30 minutes max

140 dB

Gunshot blast, jet plane

0 minutes

Summary of Contents for AMPD1000E









Reviews: