Rev. 1.7 (May 2018) 7 © DLP Design, Inc.
5.7 ADDITIONAL INFORMATION FOR OEM INTEGRATORS
The end user should NOT be provided with any instructions on how to remove or install the DLP-RFID-
LP8C. This device has been pre-certified to operate with the antenna models listed below, or any other
50 Ohm, magnetic loop antenna that resonates at 13.56MHz.
DLP Design Large Loop Antenna
DLP Design Small Loop Antenna
DLP Design Ferrite Antenna
6.0 DISCLAMER
Neither the whole nor any part of the information contained herein nor the product described in this
datasheet may be adapted or reproduced in any material or electronic form without the prior written
consent of the copyright holder.
This product and its documentation are supplied on an as-is basis, and no warranty as to their suitability
for any particular purpose is either made or implied. DLP Design will not accept any claim for damages
whatsoever arising as a result of use or failure of this product. Your statutory rights are not affected.
This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury.
This document provides preliminary information that may be subject to change without notice.
7.0 CONTACT INFORMATION
DLP Design, Inc.
1605 Roma Lane
Allen, TX 75013
Phone:
469-964-8027
Fax:
415-901-4859
Email:
Internet: http://www.dlpdesign.com