Touch screen
62
User’s Manual V1.00
DLoG MTC 6
8.
Select
Browse
to navigate to the installation folder indicated above, then
choose the
Serial
folder and click
OK
.
Figure 10.1: “Files Needed” touch installation dialog
9.
Confirm the final message
Setup is now complete
by clicking
OK
.
The computer does not need to be restarted.
10.4.2.
Calibration
The touch screen must be calibrated so that it functions correctly.
1.
Start the touch configuration tool under
Start/Programs/Hampshire TSHARC
Control Panel
.
2.
Select the
Calibration
tab and click the
Touch field
.
3.
Once calibration is complete, finish by clicking
Accept
.
4.
Select the
Click Settings
tab and select
Enable right click emulation
and enter
the following values:
Right-Click Area + Double-Click Area
each to 13;
Right-Click Delay + Double-Click Delay
each to the third line.
5.
Exit the tool with
OK
.
