Maintenance
78
User’s Manual
DLoG ITC 7
16.
Maintenance
16.1.
Cleaning the housing
The housing of the DLoG ITC 7 is best cleaned with a damp cloth.
Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can
damage the surface.
Using a high-pressure cleaner poses the additional risk of water entering the device and
damaging the electronics or display.
16.2.
Touch screen cleaning
Clean the resistive touch screen with a clean, damp, and nonscouring towel and a
dishwashing detergent.
It is recommended to apply the dishwashing detergent onto the towel rather than directly
onto the surface of the touch screen.
Do not use cleaning agents that contain ammonia or sulfur!
Do not use scouring substances, as these could scratch the touch screen.
17.
Disposal
The DLoG GmbH general terms and conditions set out the obligations for disposal in
accordance with official electronics regulations.