| 11
10 |
DLO TRANSDOCK CLASSIC USER MANUAL
Fe Settings
Setting Preset Stations
TransDock Classic comes with four preset stations. Follow these simple steps to
set your own preset stations:
1. Using the
Tuning Buttons
, tune TransDock Classic to the station that you’d
like to save as a preset.
2. Press and hold the
Preset Button
on the right side of TransDock Classic for
a few seconds to save that station as a preset channel. The screen on
TransDock Classic will flash the preset channel you just set (e.g.,
CHO1
).
3. Press the
Preset Button
to cycle to the next preset channel. Repeat steps
1 and 2 for all available preset channels (up to four).
N
NO
OT
TE
E::
Your new preset will override whatever preset was last saved on that
channel.
Controlling the LCD Backlight
TransDock Classic features an indigo blue backlit LCD screen. The backlight
comes on automatically when you power up TransDock Classic, and any time you
change frequencies. The backlight automatically turns off after two minutes.
You can also manually operate the backlight by pressing the
Backlight Button
on
the left side of TransDock Classic. If the backlight is already on, pressing this
button will immediately turn it off. If the backlight is off, pressing this button will
turn the backlight on indefinitely. To turn it off, press the
Backlight Button
again.
TransDock Classic Intelligent Power Control
TransDock Classic features Intelligent Power Control, meaning TransDock Classic
turns on automatically when you plug it in or when you connect your iPod, and
automatically shuts off when not in use for two minutes. This feature is ideal for
cars whose auto power outlet continues to draw power, even when the car is off.
TransDock Classic will turn itself off – protecting your car’s battery.
N
NO
OT
TE
E::
TransDock Classic will not turn off as long as a player or device is attached.
To manually power down TransDock Classic, hold the
Backlight Button
down for
several seconds. This will completely turn off TransDock Classic until you manual-
ly turn it on again or it automatically turns on as described above. To manually
turn TransDock Classic back on, press and hold the
Backlight Button
for three
seconds.
Getting the Best Sound Quality
• Use IntelliTune to automatically find the optimal frequency to broadcast your
iPod over your car’s FM radio. Then, tune your car’s FM radio to the frequency
displayed on TransDock Classic.
• To get the best initial performance from TransDock Classic, it is very important
that you set your iPod EQ to Off and adjust your car’s bass and treble controls to
0. Then you can experiment with adding bass and treble to your desired level.
