DLI LPC9 User Manual Download Page 79

Page: 79 / 81

CONTENTS

Technical support

Please register. Painless on-line registration gets you:

• free tech support,

• access to firmware updates,

• and information when updates and new features become available.

To save time, please have a look at the product FAQ page solutions. You may FAX questions to (408) 541-8459 or
email:

[email protected]

For phone support, call

(408) 330-5599

with the following so we can better serve you:

• The firmware version level installed in the power switch. This information can be found on the lower left corner

of the outlet control page.

• A description of the Ethernet devices connected to your unit, for example, a 10/100 PC and crossover cable.

• A description of the WiFi devices connected to your unit, i.e. their manufacturers and model numbers.

DLI LPC9 User’s Guide: 1.7.24.0

Summary of Contents for LPC9


















































































Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands

DLI LPC9, User Manual

Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands