Page
7
of
11
5 Power up:
In the display the following is shown at startup:
u003
This indicates the software-version in the controller. In this case the
software-version is 003.
After displaying the software-version, the unit enters normal
function, where a feeding is initiated according to the parameters
set.
Display in normal function:
In the Display
Description:
A 43
A
indicates that feeding is
A
ctive
43
is the remaining time of the feeding period in
minutes.
P 17
P
indicates the feeding is paused
17
is the remaining time of the feeding pause in
minutes.
A_08
After the A, a small line can be shown.
1)
A line in the top
= Motor is running
2)
A line in the middle = Dispensing water
3)
A line in the bottom = Delay before new
feeding (adjustable in menu F2)
----
Too much water detected. Feeding paused.
o
Display alternating between the 2 symbols while
beeping indicates that the lid is open.
