12
configuration of snmp values
SNMP feature will be supported in a future release.
The following SNMP values can be set by the configuration file:
SysContact the administrate contact for the network
echo “syscontact [email protected]” >> /etc/snmp/snmpd.local.co
nf
SysLocation for the location of the system
echo “syslocation somewhere” >> /etc/snmp/snmpd.local.conf
SysName the name of the system e.g the customer identification
echo “sysname customerXYZ” >> /etc/snmp/snmpd.local.conf
syslog
Syslog feature will be supported in a future release.
Support for remote logging via syslog (RFC 3164)
To start syslog, enter the following line in your configuration file
syslogd [-l <log level>] -R <Remote server IP>
The syslog daemon sends logging information in UDP packets - port 514.
If all IP addresses are handled by the DHCP server, then there is also a way that the syslog daemon may
be started by the DHCP client:
echo “-O logsrv” > /tmp/dhcp_requests.txt
/etc/init.d/udhcpc restart
The daemon will be started by the DHCP client if the log server parameter (DHCP option 7) is received in
the DHCP response.
You may control which extra DHCP options that are requested in DHCP option 55. It is done by creating a
file
/tmp/dhcp_requests.txt
containing just one line with a list of request commands to the DHCP client.
The format of the line is:
-O <option name> [-O <option name>] ...
The following values for
<option name>
are currently supported:
Name
DHCP Option
Description
dns
6
Domain name server IP
logsrv
7
Log server IP address
hostname
12
Hostname of the box
domain
15
Domain name
serverid
54
DHCP server identifier
Summary of Contents for forsete-ii series
Page 1: ...juma forsete ii series user guide...
Page 9: ...9...
