GAS CONNECTION
Connecting Gas Hose
The device must be mounted the shortest from gas connection place and must not
leak. The gas hose that is used should not be longer than 150 cm for your safety.
Connect the clamp to the hose. Then connect the hose to oven. Finally, tighten the
clamp with a screwdriver. (See Figure 4)
Repeating the same procedure for the other ends of the hose and connect the tube.
Make sure the sealing control.
If you need to use your product in a different type of gas, you have to contact
authorized service to perform the conversion.
WARNING: LPG cylinders should not be kept in the house.
Figure 4
1-LPG connecting terminal
2-Plastic hose
NOTE: The gas hose even normal and stable please renew in about 4-5 year.
Connecting Metal Flexible Pipe
The device must be mounted the shortest from gas connection place and must not
leak. The gas pipe that is used should not be longer than 150 cm for your safety.
Please note that the suitability of the connection record. (1/2 must be)
Metal seals use the combination according to the standards. (See Figure 5)
Summary of Contents for La cottura
