DK-TEC SP31205 User Manual Download Page 7

6

 

 

5. Operation of the machine

 

The engine comes with oil.

 

 Refer to the engine manual  for oil type and quantity.

 

 

Refill engine oil

 

1.  The machine must stand on a level surface.

 

2.  Remove the filler lid/dipstick to  refill engine oil.

 

3.  Refer to the engine manual for correct quantity.

 

 After filling,

 the 

 lid/dipstick is installed again. 

 

4.  Check the amount of oil daily and top up as needed .

 

 

NOTE:

 During the run-in phase, the oil must be checked frequently.

 

 

CAUTION

 

DO NOT

 attempt 

 to start the engine until the recommended amount and type of oil is topped up.

 

 If 

this is not observed, any kind of warranty is waived.

 

 

Refill with petrol

 

1.  Use only clean, fresh standard unleaded gasoline.

 

 92/95

 

2.  Do not

 mix 

oil in the gasoline.

 

3.  Unscrew the cover  slowly, do not overfill the tank but leave about 1 cm for the gasoline  to 

expand when heated.

 

4.  Screw the cover back on and wipe

 up 

 any spills.

 

 

DANGER - Inhalation Warning

 

Toxic fumes from the machine can kill you. Do not operate the machine in enclosed spaces, even 
if they are ventilated. When refueling, the machine must be cold. Refuel only outdoors.  Keep 
open   flames or sparks away from the area when

 

refueling, otherwise there  will be a risk of 

explosion that could result in death or serious injury.

 

 

WARNING

 

Before putting the  machinery

 into service 

 

 read

 and understand the 

 following instructions

 and 

 

safety instructions. Failure to do so and the machine is mis-operated can cause damage to 
property, to the user and to spectators.

 

Summary of Contents for SP31205
















Reviews: