DK-TEC HNEFG User Manual Download Page 9

09/2019

 

8

 

 

 

 

 

WARNING

 

Failure to read this manual before operating the 

machine may result in injury or death.

 

 It is your 

responsibility to keep an eye on the safety labels 

and to follow them.

 

 

 

 

 

 

Transport:

 

4. Instruction manual

 

NOTE

: Always turn off the  PTO before raising the flail mower to the transport position.

 

•  When the flail mower is raised to

 the

 transport position, make sure that

 the

 PTO is not in 

contact with the tractor or flail mower. Adjust and set the tractor's 3-point suspension at a 
height so that the PTO is not in contact with the flail mower in the raised position.

 

•   

 Be

 sure to reduce the running speed of the tractor  when  turning and  leave enough space

 so 

 

that

 the 

 flail mower does not come into contact with buildings, trees or fences, etc.

 

•  Choose a safe ground speed when transporting  from one area to another.

 

 When  driving on 

roads, drive so that faster-moving vehicles can pass you safely.

 

•   When driving on uneven or hilly terrain,  put the tractor in a lower gear.

 

 

Caution:

 

When driving on public roads, regardless of at night or during the day, use lights and other appliances 
so that there is sufficient warning for operators of other vehicles.

 

 Comply with all federal, state and 

local laws.

 

 

Cutting instructions:

 

•  Clear the area  to be cut of objects and remains that may be picked up and thrown by the flail 

mower's knives.

 

•  Grass is best to mow when dry.

 

 Mowing wet grass can cause clogging which results in 

lumps of grass.

 

•   

When

 mowing  extremt tall grass, it is best to raise the cutting height and mow off

 the 

 area

 

several times, during which the height of the flail mower

 is 

 constantly  reduced.

 

 

Instruction manual:

 

Proper maintenance and adjustments are the key to long machine life.

 

 With careful and systematic 

inspection of the flail mower, expensive maintenance, time and repair can be saved away.

 

 

Before you start  mowing, the following overhaul should be carried out:

 

1. Check the oil level in the gearbox.

 

2. Check that all connectors in the gearbox  have been replaced and tightened properly .

 

3. Make sure that all

 the 

 blades, bolts and nuts of the flail mower are tensioned.

 

4. Be sure   all shields and shields are in place and safe.

 

5. Lubricate the PTO shaft and all other lubricating nipples.

 

Summary of Contents for HNEFG

















Reviews: