To operate
Switching on/ off
Ø
Move the on/off switch to the right on the device in the ON
position in order to switch on the device. The following
message appears when it is operated for the first time, in
order to help you with the program search and the basic
settings of the device:
We advise you to press the ENTER button now
.
Tip:
Here also, just as in other device menus, the selected option is marked yellow. You can
select this using the
ENTER
-button. With
3456
buttons you can select the other
button(s). With the
button you can go one level up or down in the menu.
Ø
Finally select the country in which you are running the device
with the
34
buttons. The device then selects the language of
the menu accordingly. With the
6
button you can switch to
the following menu item and can select another language for
the menu, using the
34
buttons. In the line below , the “time
zone” of the selected country is displayed. Under “Antenna
power” you can select whether you want to use a passive
antenna (without the given booster, like the one enclosed =
OFF) or an active antenna (ON) on the device. Then select
“PREV” and press ENTER.
Ø
The device now for security asks if you want to start the
automatic program search. Press the ENTER button and the
search starts.
Ø
All receivable programs are now saved sequentially. Thereby
the device continuously provides you information on the
progress of the program search. After the end of the search
the program last found is displayed.
Important information
:
- Do not disconnect the device from the antenna during this process, or else the
programs set on the device can get deleted. In such case you have to start the
program search afresh. (open the
Main menu > Program Search
).
- Do not change the “Regional Setting” after the program search has been completed.
Otherwise the station numbering might be disturbed. If that happens, please return to
the previous “Regional Setting” to solve the problem.
Ø
Press the
POWER
button of the remote control or push the on /off button on the device in
the OFF position when you want to switch off the device. You can switch on the device once
again by pushing the on /off button towards right in the ON position or by pressing the
POWER button of the remote control.
9
Summary of Contents for DVB-T350
Page 1: ...5...
