Power supply
You can operate this device with the mains voltage of AC230V~ / 50 Hz, or with battery
power.
Mains operation
Connect the mains cord to a properly wired wall outlet with a voltage of AC230V~ / 50 Hz.
Now the device is operational.
Battery operation
Open the battery compartment on the bottom side of the unit. Insert 6 x 1.5V UM-2 R14 „C”
size batteries (not supplied) into the compartment according to the insertion instructions in the
battery compartment. Observe the correct polarity of the batteries, as otherwise the device may
suffer damage. Due to their longer service life, we recommend you to use alkaline batteries.
Close the compartment again. Now the device is operational.
Batteries must not be thrown in the household waste. Please take used batteries
to the respective collecting points or take them there where you have bought the
new ones. Do not throw batteries into the fire.
General operation
Move the function switch to choose the desired function.
Ø
"AM” for AM radio reception, or
Ø
"FM” for FM radio reception, or
Ø
"CD” for CD playback.
To switch the unit off, move the function switch to the "OFF” position.
With the
VOLUME
controller at the right side of the unit you can set the volume as
requested. Turn the controller towards the rear to increase the volume. Turn it towards the
front to lower the volume.
5
Summary of Contents for CDR-50
Page 1: ......
