EN
6
4. Adjust the strap lengths:
– Ensure tab is lifted from the strap, allowing the strap to
move freely (see arrow position A in figure 5)
– By pulling strap away from the body, remove slack from the
backside of brace (see arrow position B in figure 5)
– Ensure uprights are aligned on medial and lateral sides of leg
– Lower tab and apply pressure to secure strap
3. Telescope sliders by depressing the slider button until the
desired length is reached. The top and bottom sliders should be
adjusted first, followed by the sliders closest to the knee (note
that inner sliders cannot be adjusted until the outer sliders are
moved to provide sufficient clearance). Ensure that both bars
are equal in length and that each strap slider is indexed to the
same position on each upright respectively.
4A
4B
5
A
B
