dji WCH2, User Manual

Page: 6 / 65

5
EN
Status LED Descriptions
Status LED Description
Blinks Green Charging
—
Solid Green Fully charged
Blinks Red
Battery Charger Error. Retry with
an official battery charger.
—
Solid Red Battery error
Blinks Yellow
Battery temperature too high/
low. Temperature must be within
operating range (5°-40℃)
—
Solid Yellow Ready to charge
Alternating
Green Blinks
Intelligent Battery not detected
Updating the Firmware
DJI will release firmware updates when available. Refer to the
official DJI website and follow the instructions below to update the
firmware.
1. Download the latest firmware update program from the official
DJI website.
(http://www.dji.com/crystalsky/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using
a Micro USB cable.
3. Run the firmware update program. Press the update button and
wait for the process to finish.
4. The Charging Hub will automatically restart when the update
has been successfully completed.
5. Repeat this process if the firmware update fails for any reason.