dji RoboMaster EP Programming Manual Download Page 62

Page: 62 / 187

Note:

There is no visible effect when using the modules "Shoot Infrared Beam Once" and "Shoot Infrared Beam
Consecutively" to shoot infrared beams.

(1) Description: Control the blaster to shoot infrared beams consecutively.

(2) Type: Execution, Non-blocking

(3) Example: Infrared shooting.

The gimbal rotates around the yaw axis and the blaster consecutively shoots the infrared beam.

Note:

1) The default frequency is one shot per second.

2) The module "Shoot Infrared Beam Consecutively" is a non-blocking module, that is, it will continue to shoot
until it encounters the "Stop Shooting Infrared Beam" command or until the program ends.

3) The difference between the modules "Shoot Infrared Beam Once" and "Shoot Infrared Beams
Consecutively" are as follow:

Summary of Contents for RoboMaster EP




























































































































































































Search results

Summary of Contents for RoboMaster EP

Reviews:

Brands by name

Popular brands

dji RoboMaster EP, Programming Manual

Search results

Summary of Contents for RoboMaster EP

Reviews:

Brands by name

Popular brands