dji PHANTOM 4 User Manual Download Page 33

Page: 33 / 65

Remote Controller

Phantom 4

User Manual

Position

Figure

Flight Mode

Position 1

P-mode

Position

S-mode

Position

A-mode

Flight Mode Switch

Toggle the switch to select the desired flight mode.

You may choose between; P-mode, S-mode and A-

mode.

Position

P-mode (Positioning)

：

P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS

and Obstacle Sensing System to automatically stabilize itself, navigate between

obstacles or track a moving object. Advanced features such as TapFly and

ActiveTrack are enabled in this mode.

S-mode (Sport)

：

The handling gain values of the aircraft are adjusted in order to enhance the

maneuverability of the aircraft in S-mode. The maximum flight speed of the

aircraft is increased to 20 m /s in this mode. Note that Obstacle Sensing

system is disabled in this mode.

A-mode (Attitude)

：

When neither the GPS nor the Obstacle Sensing System is available, the aircraft

will only use its barometer for positioning to control the altitude.

RTH Button

Press and hold the RTH button to start the Return-to-Home (RTH) procedure. The LED ring around the RTH

Button will blink white to indicate that the aircraft is entering RTH mode. The aircraft will then return to the

last recorded Home Point. Press this button again to cancel the RTH procedure and regain control of the

aircraft.

Adjusting Controller Sticks

Hold and twist the controller sticks clockwise or counter clockwise to adjust

the length of the controller sticks. A proper length of controller sticks can

improve the controlling accuracy.

Summary of Contents for PHANTOM 4



























































Search results

Summary of Contents for PHANTOM 4

Reviews:

Brands by name

Popular brands

dji PHANTOM 4, User Manual

Search results

Summary of Contents for PHANTOM 4

Reviews:

Brands by name

Popular brands