1
©
2022 DJI All Rights Reserved.
EN
Disclaimer and Warning
Carefully read this entire document and all safe and lawful practices provided before use.
Introduction
Boasting DJI’s O3 Pro Video Transmission technology, the DJI
TM
High-Bright Remote Monitor can
connect wirelessly to compatible devices when used with the Ronin 4D Video Transmitter or DJI
Video Transmitter. The monitor enables users to follow the live view of the camera and to control
the camera remotely. An expansion plate can be mounted to the monitor to expand the DC and
CAN input and HDMI and SDI output. The hand grip ports on the remote monitor expansion-
protective frame can be used to mount the grips for remote control. The remote monitor supports
DJI WB37 batteries and also NP-F series batteries when used with the NP-F battery adapter.
Overview
1. Detachable Antennas
2. Ventilation Holes
3. 3.5mm Audio Output Jack
Monitors the audio recorded by the transmitter device when a monitoring device is
connected.
4. microSD Card Slot
The slot supports a microSD card of up to 512 GB. The remote monitor supports local
recording and can play the recording files independently of the transmitter device. Users can
set to save the recorded files to the microSD card in the Recording Device setting.
5. HDMI Port
The remote monitor can be used as an independent monitor when not used with a video
transmitter. The video input signal can be received through the HDMI port and the frame
guide and safety zone settings, exposure assistant, and focus assistant are available.
6. USB-C Port
Connect to the DJI Assistant 2 (Ronin Series) software using a USB-C cable for device
activation and firmware update. The video stream from the monitor can be used as a
1
7
8
13
3
2
4
5
6
9
10
11
12
