manualshive.com logo in svg

dji LIGHTBRIDGE 2, User Manual, Page: 30 / 33

Share
Download
dji LIGHTBRIDGE 2 User Manual Download Page 30

DJI GO App 

30

 

©

 2015 DJI. All Rights Reserved. 

DJI Lightbridge 2 

User Manual

[2] Transmission Mode

  Low Latency Mode: Optimized for smooth transmission, the channel latency is about 50ms 

in interference-free environments.

  High Quality Mode: Optimized for high quality transmission.

[3] Output Port

Select HDMI or SDI as your output device.

[4] Output Mode

Select different video sources to display:

 LB

：

Displays the HDMI or AV output of the FPV camera.

 EXT

：

Displays the video from the HD Gimbal.

 PIP_LB

：

Displays the video from HD Gimbal camera as the main subject, and the HDMI 

or AV video from FPV camera in a mini window.

 PIP_EXT

：

Displays the HDMI or AV output of the FPV camera as the main subject, and the 

video from the HD Gimbal in a mini window.

[5] Output Format

Select the video output format. 

[6] OSD Settings

Enable OSD or change the display margins on your HDMI or SDI device. 

[7] Picture-in-Picture for HDMI/SDI

Set the position of PIP on your HDMI or SDI device.

[8] Signal Diagnostics

Run signal diagnostics to test for an antenna malfunction.

Summary of Contents for LIGHTBRIDGE 2


































Reviews:

No comments