4
1.
Status LEDs:
The status LEDs display battery levels for three seconds after
the batteries are inserted into the charging hub. The LEDs in an array blink
successively during charging and change to solid green after the corresponding
battery is fully charged.
2.
Function Button:
Press to check the battery power level. When both the
intelligent flight battery and an external device are connected for charging, the
battery will be charged before the external device. Press and hold the function
button for two seconds to switch the charging priority.
Place the charging hub on a flat and stable surface when in use. Make
sure the device is properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals on the hub. Clean the metal
terminals with a clean, dry cloth if there is any noticeable buildup.
Visit https://www.dji.com/mini-3-pro/downloads and refer to the DJI
TM
Mini 3 Pro
User Manual for more information.
Specifications
Model Number
CHX162-30
Supported Charger
USB Power Delivery charger
Input (USB-C)
5 V 3 A, 9 V 3 A, 12 V 3 A
Output (USB)
5 V 2 A
Operating Temperature
5° to 40° C (41° to 104° F)
DJI Mini 3 Pro Two-Way Charging Hub
(Figure A)
EN
Mount the marked propellers to the marked motors and the unmarked
propellers to the unmarked motors.
Use the screwdriver provided in the aircraft package to remove and
install the screws. Unsuitable screwdrivers may damage the screws.
Use the new screws provided with the propellers when installing. DO
NOT reuse old screws.
Use two propellers from the same package. DO NOT mix with propellers
from other packages.
DJI Mini 3 Pro Propellers
(Figure B)
Specifications
Model Number
BWX162-2453-7.38
Capacity
2453 mAh
Max Charging Power
37 W
Battery Type
Li-ion
Chemical System
LiNiMnCoO2
Charging Temperature
5° to 40° C (41° to 104° F)
DJI Mini 3 Pro Intelligent Flight Battery