©2013 DJI Innovations. All Rights Reserved
CE Statement
Hereby, SZ DJI TECHNOLOGY CO. LTD declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
FCC Statement
：
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
DJI Statement
(1)
Before use of the product, please accept some flight training (Using a simulator
to practice flying, getting instruction from a professional person, etc.).
(2)
Check that all parts of the multi-rotor are in good condition before flight. Do not
fly with aging or broken parts.
(3)
Check that the propellers and the motors are installed correctly and firmly before
flight. Make sure the rotation direction of each propeller is correct. Do not get
close to or even touch the working motors and propellers to avoid serious injury.
(4)
Do not over load the aircraft.
(5)
Make sure that the transmitter battery and flight battery are fully charged.
(6)
Try to avoid interference between the remote control transmitter and other
wireless equipment.
(7)
The fast rotating propellers of aircraft will cause serious damage and injury.
Always fly the aircraft 3m or above away from you and unsafe conditions, such as
obstacles, crowds, high-voltage lines, etc. FLY RESPONSIBLY.
(8)
All parts must be kept out of the reach of children to avoid CHOKE HAZARD; if a
child accidentally swallows any part you should immediately seek medical
assistance.
