OPERATION
CD PLAYER
1.
Turn the power switches to ON position, the power indicator lamp lights.
2.
Turn on “CD” player power switch to ON position and adjust the volume knob; press the “power” button
on the CD panel.
3.
Insert CD disk, CD will be loaded and played automatically.
4.
Press “PLAY/PAUSE” button to play the disk. If the volume is low, turn the “MASTER” volume by properly
turning the knob.
During Play
1.
Press “PLAY/PAUSE” button to stop playing temporarily.
2.
Press “PREVIOUS”button for a short time can select to play the previous track, while press it for a long time
can select fast backward playing.
3.
Press “NEXT” button for a short time can select to play the next track, while press it for a long time can
select fast forward playing.
4.
Press “STOP”button to stop playing, press again to let CD disk out.
5.
Press REPEAT/SHUFFLE button to choose between play model.
- Repeat mode
- Shuffle mode
6.
Press Repeat Key to select/cancel repeat mode,
- Repeat current track
- Repeat album
7.
Press “PROG” to set track order during playing. Use “REV/FWD” to select track, press “ enter” to confirm,
continue to set the second track by the same operation.
You can set 20 tracks at most. Press “PLAY/PAUSE” to play the list.
Press “PROG” again to cancel that function.
8.
Press “ FOLDER” button to choose folder with MP3 files
Wireless mic MIC 1&MIC 2
1.
Turn the master power supply switch to ON, and the red lamp lightened.
2.
Turn MIC 1, MIC 2, MIC VOLUME to adjust the volume of MIC 1 & MIC 2.
3.
Twist the mic lid, load one 9V battery to the battery slot in a right way. Twist the back lid. Please replace
with new battery when the voltage of battery in the mic is less than 8V or when the indicating light of the
mic is on. Then push the mic power supply knob to ON, and the lamp is lightening. It works. Push the knob
to the middle mute position, prevent laser. Push it to the OFF position to turn off the wireless mic power,
thus save electricity.
4.
When the wireless mic is working, say lightly, and adjust the VOL knob which is beside the yellow lamp
channel signal to the suitable position.
5.
Turn ECHO to adjust the volume of the echo on the MIC.
6.
Turn TONE to adjust the tone of the MIC.
Don't take the mic to the speaker, to avoid acoustic feedback(laser).
5
Summary of Contents for VISA 80
Page 1: ...USER MANUAL E1 E8 VISA 80 full function portable professional speaker...
Page 8: ...SYSTEM CONNECT 7...
Page 10: ...9...
