DJ-Tech UI Station User Manual Download Page 17 | Manualshive

Page: 17 / 20

background image

FIRMWARE VERSION

You may display the unit firmware version Firmware is the unit internal
programming code. Once enter setup mode and then turn the FOLDER
KNOB until Vxx.xx is displayed. “x’s” are the version number.

FIRMWARE upgrade:

Step1: Copy the controller code or DSP code from PC and then save into memory device (Files must be in

root directory).

Step2. Off the controller power cord and re-plug in.

Step3: Press STANDBY button to power on
Step4: Insert memory device into player1, USB A port or SD card slot A to upgrade and “Update 10%~100%”

will show in the display (for DSP code), “UpdateUIxx” will show in the display (for controller code).

Step5: When upgrade is done “COMPLETE” will display, removed memory device

.

Step6: Off the controller power cord and re-plug in. After pressing the STANDBY to power on, if “UpdateUI - -”

is displayed (failure), please repeat procedure step2 to step5.

Step7: Check the version number of the new firmware in the

SETUP MODE

Step8: Done

Note:

1. Please delete the code within memory device when upgrade has already done.
2. Power disconnection during processing or unknown memory device will cause failure.

SYSTEM SETTING

16

«
...
15
16
17
18
19
...
»

Summary of Contents for UI Station





















Reviews:

No comments

Related manuals for UI Station

Brand: UnionSpecial Pages: 56

Brand: Rain Bird Pages: 2

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

Brand: Ognibene Pages: 28

Brand: Hameg Pages: 24

Brand: Vaisala Pages: 118

Brand: JBL Pages: 38

Brand: JBSYSTEMS Light Pages: 32

Brand: JBM Pages: 12

Brand: Land Pride Pages: 36

Skid Steer Rakes SR2672

Brand: Land Pride Pages: 2

Brand: Land Pride Pages: 2

Disc Harrows DH3510

Brand: Land Pride Pages: 2

Brand: Land Pride Pages: 4

Brand: Land Pride Pages: 4

Straw Crimper CR2572

Brand: Land Pride Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands