DJ-Tech Cube 50, User Manual

Page: 6 / 10

E-5
Notes on Battery
Notes:
1. When the unit has not been used for 2 months continually, please
connect it to AC and charge for 8 hours, and charge for 48 hours at the
first- time using. This protects the battery capability and extends the
lifetime.
2. The battery shall not be exposed to excessive heat such as sunshine, fire
or the like.
3. The unit remains operable even the AC is disconnected.
WARNING
Please do not attempt to open the back cover or power adapter as
opening or removing the covers may expose you to dangerous voltage or
other hazards, and it will also cause the restricted servicing to be disabled.
There is no user servicing components inside.
Charging Indicator
Battery is being charged when
AC source is connected.
Green LED will flash when
charging and remain ON after
fully charged.
Red LED will be lightened when
battery level is low at 20% left.
Low-Battery Protection
Power will be cut automatically
when battery is too low to
operate. User has to connect
Cube 50 to AC source in order to
charge and operate.