6. TECHNICAL SPECTION
Rated output power:
Subwoofer....................................................................................................................................150W (4
Ω
THD = 1%
)
Satellite................................................................................................................................. 60
+
60W (4
Ω
THD = 1%
)
Channel separation..................................................................................................................................................
≥
50dB
Nominal input sensitivity:
MIC............................................................................................................................................................................ - 45dB
LINE........................................................................................................................................................................... - 10dB
AUX............................................................................................................................................................................. - 6dB
Frequency response:
Subwoofer.........................................................................................................................................40Hz-120Hz -3dB
Satellite..........................................................................................................................................100Hz-20KHz -3dB
S/N ratio..................................................................................................................................................................
≥
80dB
TALK OVER..........................................................................................................................................................
≥
12dB
LIMIT.....................................................................................................................................................................
≥
15dB
Rated power voltage....................................................................................................................................230V
~
50Hz
Maximum consumed power....................................................................................................................................
≤
580W
Dimension (W ×H ×D) mm:
Subwoofer ............................................................................................................................................W400×H500×D450
Satellite.................................................................................................................................................W245×H355×D245
Weight:
Subwoofer.....................................................................................................................................................................29kg
Satellite....................................................................................................................................................................... 6.6kg
7. SIMPLE PROBLEMS&TROUBLE SHOOTING
You are advised to follow the methods listed in the table to solve corresponding problems (If they appear).
If it still does not operate properly, ask help from professional maintenance or contact us. Don't do it by yourself in
order to avoid any unnecessary accidents!
Problems
Possible
reasons
Resolvents
Press the power
switch but fail to
switch on.
1. There is no power from the power inlet.
2. The plug is not connected properly.
3. The fuse blows.
Switch off the power; Make sure there is power
from the power inlet, The plug is connected well
and the fuse is intact. Then switch on the power.
There is no sound
for some channels
or the
volume is low.
1. The input signal is not connected properly.
2. The cable plug of the satellite speaker is not
connected properly.
3. Relative volume controls are adjusted improperly.
Check whether the wires of the input device are
connected well; or the cable plug of the satellite
speaker is not connected properly; or the volume
controller is switched on.
There is no effects
sound
or it is bad.
1. Effect control is not switched on.
2. The proportion of effect sound and direct sound is
not well mixed.
Adjust the relative control of effects processor
until the best effects are obtained.
There is loud noise
or AC noise.
1. The input signal is not grounded well.
2. MIC is low quality or not shielded well.
3. The voltage of the power inlet is too low.
Check the input signal wire; replace the MIC
with a high quality one; wait until the voltage of
the power inlet is normal then start the system
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate
collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about recycling of this product, please contact your loca
Office, your household waste disposal service or the shop where you purchased the product.
l Civic
6